Four Tips for Fence Installation

Comments Off on Four Tips for Fence Installation

Fences provide privacy and security to your property, as well as protection from the elements. They can also be a way to demarcate your property lines and divide your yard into separate areas. But installing a fence requires some planning and preparation before you can begin. Here are four tips to help you measure and prepare for your fence installation project:

Confirm the Property Lines

When putting up a fence, it is important to know where your property ends and where your neighbor’s begins. If you don’t, you may be liable to have your fence removed or have to pay expensive fines and legal fees when the neighbors claim that your fence is on their land. This is why it is important to get a property survey done before you begin fencing on your property.

If you haven’t got a property survey, find one online or ask your local land surveyor to do it for you. The survey will establish your property lines and determine whether any trees or other permanent features on your property should be able to be fenced around, as they could pose a hazard.

Use Stakes to Mark the Corner Posts

For any fence, it is important to have a good idea of where each corner post will be placed. This will ensure that the fence panels are aligned properly when you’re installing them, and also allow you to place each fence post at the right distance from each other. Generally, you want to put your posts eight feet apart to give your fence enough room to withstand the wind and weather.

Decide how Many Fence Panels You Need

The number of fence panels you need depends on the width and height of your property. You can easily calculate this number using a fence calculator. To do this, enter your property’s perimeter in feet and divide it by the width of each fence panel (typically six or eight feet).

You will need to purchase at least one set of posts for every fence section. This will include the line and end posts. You should also buy a set of rails, which are the boards that are placed between the posts and serve as the main frame of your fence. These should be the same length as your fence sections.

Install the Posts

Once you’ve determined how many fence posts you need, you’ll need to determine the length of the posts. The distance between the post and the next will determine how tall the fence will be. If you’re building a fence that’s higher than 4 feet, you will need to add a third horizontal rail in the middle of each section of fence.

Attach the Pickets

Once all of your fence posts are in place, you can start attaching the fence panels to them. This is the most time-consuming step, as you will have to carefully assemble the entire fence. The key is to do this as evenly and consistently as possible. If you need professional fence installation services in Houston visit